Amsec Model BWB4020

U.L. Group 2 Mechanical Lock

U.L. (Underwriter's Labratory, Inc.) is an independent, third party product certification organization that rigorously tests products to ensure they conform to certain safety and security standards. U.L. defines Group 2 combination locks as resistant to semiskilled manipulation attacks. A manipulation attack is any attempt to discern the combination on the lock using the features and weaknesses in the design of the lock. Group 2 locks are the most common locks available on most safes. U.L. also defines the minimum number of combinations that the lock will allow.  However, this is a technical specification and on most locks there are specific recommended restrictions in assigning a combination that effectively limits the allowable combinations.  Group 2 locks are also required to have an internal relocking system that fires when the lock is punched.  Punching (using a hammer and punch tool) is done to try to push the lock off the back of the safe by driving a punch (or any object long and sturdy enough) through the dial spindle hole. 

ESL10XL AMSEC ELECTRONIC LOCK FEATURES:

 Replaces most mechanical combination locks.  Easy operation. Factory Reset Combination for solving lost combinations without requiring expensive service calls. Electronics are encapsulated within the lock and are sealed to prevent possible moisture related failures. Audible beep and flash from every keystroke gives maximum feedback to the user. 15 minute Penalty Lockout after four incorrect entries protects against manipulation attempts. New patented dead-latched lock design with an internal relock device for maximum security. Lock “auto-locks” when boltwork is thrown to prevent safes from being left in a day lock position. 

ESL20XL AMSEC ELECTRONIC LOCK ADDITIONAL FEATURES:

 Time Delay Mode: Delays can be set from 1 to 99 minutes. Multiple User Mode: When enabled, one Master code and eight user codes are available with full supervisory control and code management. Dual Control Mode: The lock can be programmed to require two combinations to open for added security. Armored Car Override: When enabled, allows an armored car service to bypass Time Delay. External A/C Power: Provides power for unlimited use with battery power as backup. Control Port: Turn the ESL20XL on/off with an Access Manager, Alarm System or other device.

AMSEC BIOMETRIC LOCK FEATURES:

 U.L. Type 1 listed. Patented OneTouch™ auto fingerprint verification. Unique Self-Learning function. Battery saving design with one 9V battery operation and low battery alert. Multiple Users. Programmable Time Delay 0-99 min. Wrong password lock out. User-friendly LCD Display.

SARGENT AND GREENLEAF ELECTRONIC LOCK 6120 FEATURES:

All Combination changes and programming are easily made at keypad. Uses two (2), 9V Alkaline batteries -Duracell® recommended. (E-Z keypad uses (1) 9V battery.) Keypad feedback with beep and LED flash. Multiple users - one Master code and eight user codes are available. Programmable Time Delay. Motor driven bolt. Wrong combination try penalty. U.L. Type 1 listed.

The basic BWB model safe does not include a deposit drop or key locking compartment inside. These are optional upgrades. When you add a Deposit Drop, the safe will automatically come with an internal key locking compartment for the items deposited through the drop. You may request a safe without the internal key locking compartment however, the manufacturer will require a longer lead time. 

You may pre-set the 3 digit combination on the combinational dial lock for an additional fee. Example: 33-01-67. The last number can not be lower than 21 or higher than 80.