How to Clean a Gun and How Often Should You Clean it?

If you are a proud owner of a gun, you certainly know how important it is to clean it on a regular basis. It is a well-known fact that a clean gun is a safe gun – with a clean firearm, the chances of accidental discharge will be on the lowest possible level. So clearly, cleaning the weaponry is not something that’s based on esthetics, but on functionality and safety. 

With guns, everything is about protocol and following the exact steps, because otherwise, you risk causing physical injuries and damages of serious proportions. So today we are going to guide you through a process of cleaning the weapons, without leaving out any detail. 

Step 1: Preparation

When cleaning a gun, you should do it in a bright room with good airflow, so you can make sure you won’t create any mistakes and that you won’t be affected by the cleaning chemicals. It would be good to do the whole procedure in some spacious corner that will provide you with enough room to work smoothly, with everything you need just in front of you.

The best place to do this is in a garage, or even better outside if it’s not raining or freezing. You need to use a sturdy surface, you cannot risk the foundation you work on being unstable. And it is important not to clean your gun on a dining table, kitchen surface, or any other place where people are eating and drinking because of the risk of contamination. Gun cleaning products are based on solvents and oils, and there is also lead and carbon fouling you don’t want to end up in your food.

The next step includes removing any live ammunition from the room you are going to use for gun cleaning. It is a safety measure. That way, you will eliminate the risk of mishandling the weaponry and endangering you and other people you live with. SO leave the ammunition in a gun safe or some other room you are not using for cleaning purposes.

Step 2: Read the manual

Even if you already have read the manufacturer’s manual that came with the gun, now is the time to go through it again. You will find there all the necessary information and detailed explanations on how to disassemble and clean your firearm correctly. Every gun has a specific structure and mechanism, and even though the cleaning procedure is a universal one, you will have to know how exactly your gun works in order to perform this the right way. The manual will provide you with everything you need to know in order to disassemble, clean your gun the safest possible way, and reassemble it again. The great thing is that manuals usually come with colored pictures that explain every step visually, so you won’t get confused at any point.

Step 3: Prepare your tools

Not all guns clean the same way and with the same tools, but in most cases, these are the things you will have to own in order to do the work properly. First, make sure you have a cleaning rod of the appropriate size, a bore brush for a specific calibre, then some double-ended brushes, mops, cleaning swabs, and cleaning jugs. Also, you will need lint and fibre-free cleaning patches for the proper calibre, cotton swabs, a lustre cloth, bore snake, and of course, adequate cleaning products.

The fact is, you can find most of these items in kits that are designed for a specific calibre, and if you are missing something, you can always purchase it separately. Make sure to have the appropriate items for your calibre, some things are universal, but most of them are created to clean a certain calibre of a weapon only. It would be good to get yourself a rubber mat so you can protect the outer surface of your gun from scratching when cleaning it. Also, the cleaning cradle is a good investment if you own long guns since it will keep the firearm steady and in the right position while allowing you to use both your hands for cleaning purposes.

It would be good that you do the cleaning with safety glasses on, so you can protect your eyes from springs and debris that will fly around, as well as from chemical vapours. The gloves are another thing you should consider having, the solvent-resistant ones, in order to keep your hand safe and unburned by the previously mentioned chemicals.

Step 4: Start with a cleaning

We are now going to present you with basic steps to cleaning a gun safely. Of course, bear in mind that some of the details will be different depending on the type of gun you own.

Remove magazine

First, you need to remove the magazine, and to make sure your gun is unloaded. It is an essential step, and you cannot allow yourself to be careless and forget to do that immediately. It is a matter of safety.

Clean the barrel and the chamber

The next step includes using a bore brush to remove large pieces of carbon and metal fouling from the barrel and chamber. You need to do it in a muzzle direction. Then dip a patch that’s intended for cleaning in bore solvent and place it on the cleaning rod you want to use. Push the rod through the barrel, but do not pull it back. If you do that, you will bring the dirt right back into the bore, and you definitely don’t want to do that.

Now wait for 15 minutes so that the solvent can do its work, and after that, take the bore brush and push it inside of the barrel in order to scrub the interior of it. Keep doing that with clean and dry patches until you remove all dirt from it, and until the patch comes out entirely clean.

Now take a bore snake or any other pull-through tool that’s covered with a light lubricant, and push it through the gun barrel in order to treat the surface against corrosion. But make sure not to lubricate the bore with gun oils, unless you are not planning on using the gun soon. In case you do that, you will have to clean the barrel and remove this substance from it before shooting the firearm next time.

Clean and lubricate the action

After you took care of the barrel, you need to make sure the action part that includes the pump, slide, or bolt is clean as well. In order to do that, you will have to use a dry cloth, utility brush, and action cleaner solvent. Spray it and leave the metal and carbon debris to resolve. Make sure to use the recommended solvent for your gun type. If you are not sure which one is adequate, check that information with the gun manufacturer. Now, wait for it to dry completely.

The next step included using the needle applicator and applying lubricant drops properly, as the manual says. You need to place it at the specified points of the frame, slide assembly, and exterior of the barrel. Don’t exaggerate with the lubricant because you may cause the dirt to collect rapidly, and that can interfere with the gun’s functionality.

Clean the magazine

It’s important not to forget to clean the magazine as well, especially if you are using a semi-automatic weapon. You need to check the manufacturer’s manual and properly disassemble, clean, and reassemble this part if you want to make sure your gun will remain reliable and fully functioning all the time. Make sure to wear safety glasses for this part, since the magazine followers are spring-loaded. There are specially designed brushes for that, and residue-free solvent or cleaning agents you can use. Do not lubricate the magazine, ever, and do not use petroleum products because they can contaminate ammunition primers.

Reassemble the firearm

Again, given that every piece of weaponry is designed in a specific way, you need to check in the manual the exact steps on how to reassemble your gun. After you do that, you need to perform a functional check in order to make sure that the gun operates properly. It is essential to see if the trigger and safety mechanisms are working correctly, as well as if the slide operation, magazine retention, locking, and ejection systems are fully functional.

Clean the outside of the gun

Don’t be lazy and forgetful about cleaning the outer side of the gun as well in the end. After every interior part is cleaned and well lubricated, it is time to make sure the same applies to the exterior. All you need for this step is a regular gun cloth that will help you remove all the grease and impurities from the gun shell. These cloths are specially designed and pre-lubricated, so they can easily bring back the cleanliness and shininess of your gun.

The frequency of gun cleaning

In order to understand why it is so important to clean your gun on a regular basis, you need to know what exactly happens when you use it. Whenever you shoot from your gun, the ammunition cartridge primer creates the flame, and that flame ignites the gunpowder. That process always leaves small traces of gunpowder inside the barrel, but also on the internal parts of the action. Then, as the bullet goes through the barrel, the metal it is made of will also leave traces in the barrel. If you don’t clean your weapon properly, and as often as you should, all this dirt can affect its accuracy and reliability. You risk gun malfunction that can create very dangerous situations. Besides that, the ash that is created by the gunpowder burning will collect, and over time block the moving parts of the gun. And there is even a possibility it leads to corrosion by attracting the moisture. 

So if you want to prevent this from happening, clean your firearm on regular bases. The experts recommend doing that after every shooting session. After cleaning, you should always tend to apply a thin layer of lubricant or gun oil, especially to those parts that rub against each other. Not only will you make sure your gun is fully functional all the time if you do the cleaning process properly, but you will also prolong its lifespan for sure.

Conclusion

We can conclude that an essential part of owning a gun is knowing how to clean it. Yes, that takes some time, and yes, you will need to invest in cleaning products, but you need to bear in mind that the consequences of not doing that can be very dangerous and life-threatening. The responsible gun owner will make sure his weapon is always ready to be used, reliable, and functional like it just came out of the store. It’s not about esthetics, but about safety, and that’s something you should always remember.

Archery Guide for Beginners: All You Need to Know

Archery became very popular in the last few years, all over the world. As it turns out, a huge number of people would like to master the skill of operating bow and arrows. It’s an attractive thought knowing how to hunt with weaponry our ancestors relied on. But the thing is, there’s a lot you need to know first regarding archery basics. So we decided to present you with a thorough guide to archery that should be very helpful if you are into this subject. We are going to start with how to get into archery, after which we will analyze all crucial aspects of bows and arrows, and in the end, you will be able to find some practical archery tips for beginners.

How to Get into Archery?

So, you would like to become a fierce bow shooter, but there’s just one problem, you have zero experience. That’s okay, there’s still hope for you. The first thing you should do, and that’s what all the archery experts suggest, is to go to a local archery shop and gather some information from their personnel. These people are the treasury of knowledge when it comes to this topic, and they will be glad to introduce you with the elemental things about this warrior discipline.

Since you will most definitely need some lessons, find out what’s a good archery program and who is the best instructor in your town. It is very important to have an experienced and well-educated person on your side when you start learning archery because basics are everything in this world, and if you master them properly, you will be able, with time, to conquer this category.

The second crucial thing – don’t rush to buy your equipment, rent it at first. High-quality bow, arrows, and all other necessary stuff you may need will cost a certain amount of money, so you don’t want to make a mistake there. Your equipment needs to fit you perfectly. That way, you should take your time, try the rental, learn on it, and afterward, you can start thinking about investing in your own archery gear.

Be patient. Things don’t happen overnight. It will take time for you to learn how to have a proper posture, how to calm your hands, to focus on the target, and aim with great precision. The whole process will depend on your head-eye-hand coordination, and your physical strength needs to be on an adequate level. And remember that safety is the number one priority, so make sure to master that area first.

Bows and Arrows for Beginners

Nobody can tell you what the best bow for you as a beginner is. The truth is, you will have to try several different types so you can decide and determine which one suits you ideally. It is the matter of shooting style and the intention that stands behind it. If you would like to simply practice target shooting and nothing else, a recurve bow might be a great solution. But if you are interested in archery because you want to go hunting one day, then the compound bow is probably the one you should be looking for. Bear in mind that draw length and draw weight are the things you need to consider as well. In the matter of arrows, aluminum ones are perfect for beginners because you need to practice, and they are pretty durable, they won’t break easily.

The Two Main Types of Bows

The very first thing you need to purchase when the time comes, besides archery targets, is the bow. The quality of the bow is super important since it can improve your performance in shooting significantly, and it can provide you with much-wanted consistency. Here are two types of bows that are most popular and most commonly used by both beginners and experienced shooters.

1. Recurve Bows

Recurve bows are very practical to use because they don’t need much tuning, but it is important to get your measurements right. They are usually being used for target shooting by beginners, and also by professional Olympic competitors, but it’s not rare that experienced hunters decide to make a recurve bow their weapon of choice. Their simplicity is their biggest advantage, and they have an elegant, graceful design. Thanks to the way the recurve bow is constructed, with a curve that exists even when the bow is unstrung, the great amount of energy can be stored there and transferred to the arrow.

2. Compound Bows

Compound bows have a more complicated structure than recurve bows. They are a bit more difficult to tune, and you probably won’t be able to do it yourself, without the help of an expert. But if they are set perfectly, they can provide you with great accuracy, and they will be very easy to use. The compound bow is the favorite among hunters because of its speed and great force it can offer. If you take a look at a bow of this type, you will see there are rounded wheels on both ends that hold the drawstring. Those are the cams, and they are one of the main reasons the force of the bow can multiply and provide you with a strong and powerful output.

Parts of a Bow: The Basics

Archery for beginners can be tricky, so we decided that it’s necessary to include an explanation of parts of your weapon. We are talking about archery basics, so prepare yourself for the first lesson – parts of a bow.

  • Riser – The first thing we need to comment on is the riser of the bow that you will hold with your hand when you become ready to shoot. It connects two limbs, the upper and lower part, and it houses the arrow rest. It also features the grip and sight window. The arrow rest is the spot where you will place the back of your arrow when you draw the string. It will provide a good balance to your arrow, and it will help you with aiming part. The sight window is a spot through which you will be looking in order to fixate the aim on your target, and a grip is a place where your hand goes.
  • Nock – The nock or nocking point is the small metal part that is located in the middle of the bowstring, and it’s the place where you need to attach the back of your arrow because it will hold the arrow level properly. It will allow the arrow to rest on its place, on a string, when you start drawing it and aiming at the target.
  • Limbs – Limbs are two bent sides of a bow that are connected with a riser. They need to be set up and attached correctly in order for the bow to perform well. Limbs can be made from different materials, metal, and wood mostly, and they are often laminated with fiberglass or some other similar substance.
  • Bowstring – Bowstring is a thread that holds both sides of the limbs connected. It’s the movable part of the bow, and it can be made from various materials. It will provide force for the arrow when being shot, and it’s the part you need to draw. The bowstring is a part where the nocking point is placed.

bow and arrow on the ground

How to Choose Arrows?

When it comes to choosing bows and arrows for beginners, it is essential to get to know all their main characteristics and to pick those that are most reliable, durable, and easy to use. After we finished with bows, it is time to explain to you what are the main parts of arrows, and what are the terms we use to describe their performance. If you wonder how to learn archery, it’s by knowing all about your tools and gear.

  • Fletchings

Fletchings are the part of an arrow that has its place on the backside, and that’s the part that stabilizes arrows during the flight. They can be made from vanes and feathers. Vanes are actually created from plastic, and they are suitable for compound bows. They are very popular and often used because they are super durable and waterproof. Those made of feathers are more delicate, but they will offer you a significant amount of stability and accuracy. Traditional archers prefer using them, as well as competitive indoor shooters. They are not waterproof, but if you use specially designed sprays and powders, they can be water-resistant.

  • Arrow Shaft Materials

Arrows can be made of wood, aluminum, and carbon. Those designed from wood are the most traditional ones, but since they can easily break, they are not suitable for beginners and shooters that prefer using a compound bow that will push them with a great amount of force. The aluminum arrows are the most common ones. They are super durable and have a long lifespan, so both beginners and experienced archers tend to use them. They are suitable for compound and recurve bows, and if you are into target practicing, you should definitely choose them. The last ones made of carbon are the best hunting arrows, and only people with a considerable amount of knowledge in this field should make them their choice.

  • Arrow Spine

The spine is a measurement that shows the arrow’s ability to flex. The manufacturer will always mention the spine number, so you can know what to expect from an arrow. The rule is – the higher the number is, the more flexible arrow will be. It is important to be consistent with your arrows, which means using only the ones with the same spin so you can improve your performance over time. It is not recommended to mix them up. If you own a bow with heavy draw weight, you will need stiffer arrows, and in case of a bow with lower draw weight, more flexible arrows should be your choice.

  • Nock Fit

If you are thinking about doing this professionally, you need to pay attention to this detail. Your bowstring and arrow nock need to perfectly fit. When you place your arrow on the nocking point, it has to easily click onto the bowstring, so it can be released with a light tap only. But make sure the nock is not too tight, because in that case, the release of an arrow will have a certain amount of hold-up, which will affect its accuracy. On the other hand, if the nock is too loose, the arrow will fall off the string when you start drawing it.

  • Arrow Length

The length of an arrow is also something that will affect your shooting performance. The length is measured from the throat of the nock to the back of the point. It is important to know what is your draw length in order to know how long the arrow you will need. Ideally, the arrow length should be one inch less than your draw weight, if you want your arrow to end at the front of the riser. But it can also be longer if you would like to soften its spine.

Essentials for Beginner Archers

Well written archery guide need to include all other pieces of equipment, besides bows and arrows, you may need when hunting or target practicing. That’s why this next chapter will be dedicated to the importance of having an armguard, a bow case, quiver, gloves, etc.

  • Armguards

It’s not that rare for the bowstring to strike your firearm when you release an arrow, and that can burn quite bad. So in order to avoid that we suggest you get yourself an armguard. It’s quite an affordable piece of gear that can protect you from bowstring’s bite. It will also keep your sleeves intact and undamaged. 

  • Quivers

Having a quiver will make your job much easier since your arrows will be in one place, just at the reach of your hand. It’s a bag designed to welcome your arrows, and it can be designed to go on your back around your shoulder, on your waist attached to your belt, or there is a modern solution where a quiver can be connected to your bow.

  • Sights

The sight for the bow is exactly the same as what the scope for the rifle is. It is a piece of gear that doesn’t come with a bow always, so quite often you will need to purchase it separately, and then attach it to the weapon properly. It will help you aim better, and therefore have much better performance when shooting.

  • Releases, Tabs or Gloves

All three of these things will protect your fingers when firing an arrow. Releases or release-aids have to be attached to the bowstring, and they are triggered by the thumb and index finger. You will need to aim and squeeze them in order to launch arrows. Besides protecting you, they can improve your shooting accuracy. Tabs and gloves are being used by shooters who prefer finger releasing, and they are usually made of leather, in many sizes.

  • Bow Case

Given that bows are pretty sensitive and can be damaged easily, you should probably get a bow case, especially if you travel from your home to the shooting range quite often. There are soft and hard cases, so you can choose them according to your needs. Hard cases will offer you more protection, and they are suitable for airline traveling, but most archers prefer soft cases because they are lighter and allow you to organize additional gear better.

  • Tools and Other Accessories

Besides these previously mentioned items, you will probably need a few more things in order to complete your target practicing or hunting gear. There is a bow stringer that can help you stringing your longbow or recurve bow, a bow stand that can be quite useful when you are not using your weapon, a string wax that needs to be applied on a bowstring in order to protect it, and arrow lube that will increase its performance regarding releasement.

How to Practice Archery?

The easiest way to get started with archery is at archery ranges. Those are the places where you can get your first lessons and basic knowledge. The great thing is, range employees will probably make you take an introductory safety class where you will learn how to always make sure you and everybody around are safe while you are shooting. Also, shooting ranges have experts that will evaluate what the proper bow for you is, and what are the arrows that are suitable for it. They will let you rent the equipment until you are sure you are ready to invest in your own archery essentials. Another benefit of going to the local range is the fact you are going to meet some like-minded people who will probably be ready to share their experience with you and give you some advice.

Another option is to stay home and learn what you can from the Internet. There are some seriously good sites that can provide you with the perfect amount of information that will help you stop being such ignorant. Certainly, it won’t be enough, they can offer you only theoretical knowledge, so at some point, you will have to get up, go out, and search for the place where you can get a real experience.

The third solution is to get private or group lessons from an experienced instructor. That thing will cost a bit more than going to the range because you will get undivided attention from your teacher, but most people who went through it claim that it was worth it. It’s not rare that many archery shops offer group classes for both grown-ups and kids, so you should definitely consider applying to one of those.

Now that we came to the subject of kids who would like to get into the world of archery, it’s time to mention a huge number of programs that are at their disposal. We are talking about events organized through schools, camps, youth clubs, community centers, and bow hunting clubs. There’s a JOAD (Junior Olympic Archery Development) program for kids and young adults who are between 8 and 20 years old, OAS (Olympic Archer In the Schools) that will provide them with great challenges, NASP (National Archery In the Schools Program) that can offer them some basic archery knowledge, etc.

Archery Hunting Tips

In the end, it is time for some archery tips, especially if we are talking about archery hunting for beginners. Let’s see what you need to know and implement if you want to be a successful bowhunter.

Basics

First and foremost, you always need to have the right posture, otherwise, you risk injuring yourself or damaging the equipment. Second, always wear appropriate clothes. Stay away from the clothing that can interfere and affect your shooting. Third – use protective gear. It is important to have an armguard, and gloves or bow releases in order to make sure you will not be harmed by your own weaponry. Fourth – aim only on the target. It can be quite dangerous to aim at people, for the sake of fun, because accidents can happen. And the fifth rule is – don’t dry fire your bow! That means don’t pull back the bowstring and release it without an arrow. There’s little chance you won’t damage your bow by doing so.

Patience is the key

Many experienced bow hunters will tell you that this is the most valuable advice they have ever gotten. You need to know that hunting is a game only patient ones among you will win. You need to prepare for the scenario of you staying calm and still for hours, with the possibility of going home at the end of the day without prey. And you have to forbid yourself from feeling discouraged if something like that happens.

archery patient man waiting for the perfect shot

Practice, practice, practice

There will probably be only a few seconds for you to launch your arrow towards your target in order not to miss the opportunity, so it is crucial to be sure you won’t fail. That means that you have to practice all the time, in a shooting range, or your backyard, for hours if necessary. And it would be good to do all that with the entire equipment you are going to use and wear during hunting, just as you can get the appropriate feeling on what’s going to be like, and get used to it all.

Forget about deodorant

Animals have a refined sense of smell, so they can smell you from miles away and decide not to approach. So our suggestion is – forget about deodorant and all other chemicals that will change your natural odor. Now, the way our body smells can also be a problem, so it would be ideal to wash yourself with odor-free soap that will neutralize it all, every time for a couple of days before hunting. 

Conclusion

Now that you have all this knowledge, you can start your own archery journey. We hope the lines above were helpful, and that we provided you with all the basic information you were hoping for in order to feel free to step into the archery range and take a bow into your hands. Please be responsible, get to know all the parts bows and arrows are made of, take a safety class first, and then start practicing. You will see the progress every day, it’s just important to stay focused and encouraged. Good luck!

Different Types of Holsters and Their Usage

Gun holsters are such an innovative and practical solution for situations when you want or need to have your gun on you. Their main purpose is to provide you with a safe and easy to access place to put a gun in when you are on the move. There are several different types of holsters, and each of them is designed to follow your body constitution, and allow you to comfortably carry a gun. 

Now, not every holster will be suitable for every situation you may find yourself in. Some of them will be great for concealed carry, and some will be adequate for those scenarios when you don’t want to hide the fact that you have a gun on you. Holster style depends very much on your personal style, when it comes to the way you dress, and the way you want to carry your weapon.

There are five main types of gun holsters:

OWB

Outside the waistband holsters are designed to be worn on your belt, in a way that the gun case goes on its outer side, on your hip. They are the original gun holsters that were developed from old Western gun belts that had incorporated holsters on them. OWB holsters can be made of leather or high-quality plastic like Kydex. The gun shells are usually custom-moulded to welcome some specific gun models, but they can be generic and suitable for several different guns. OWB holsters are not recommended if you are looking for a concealed carry option, but they have so many other advantages.

IWB

Inside the waistband holster is pretty similar to the previously mentioned one, but unlike OWB holsters that will print on your shirt, IWB will stay hidden and undetected. When it comes to concealed carry, this type of holster is probably the best. It also needs to be attached to your belt, but on the inside, and it will be placed directly on your skin. Different materials can be used for IWB holsters. However, the most popular option, and the most comfortable one, is based on a combination of synthetic textile and Kydex shell. You will be able to wear your shirts tucked or untucked, as you wish, and you will have good access to your gun in both cases.

Shoulder holster

Shoulder holsters are super popular, and they are usually one of the first choices when it comes to everyday weapon carry. Their greatest advantage, besides the fact that they are very comfortable to wear, lies in their structure that doesn’t allow you to feel the weight of your weapon only at one place. Thanks to the belt system they distribute the weight of the gun equally on your entire upper body, so you won’t feel the burden of it. Other than that, they will allow you to have quick and easy access to the pistol placed in a shell, and they are usually fully adjustable, so you can make them fit you perfectly. Shoulder holsters are made of leather or soft and stretchy neoprene that’s breathable, so they will be a good solution for a long period of time weapon carry.

Ankle holster

This type of holster is mostly suitable for people who want to have a backup gun place on their body, just in case of an emergency. They are custom-molded or universal, but they are usually suitable for smaller gun types. These holsters are designed from two parts – from a gun case and a soft adjustable base that goes around your calf. The thumb break retention stripe is a must when it comes to the ankle holster because when you are on the move, it needs to hold your weapon in its place, no matter what. They are usually designed for military and law enforcement, and they need to be worn on your dominant leg so you can have easy and natural access to the gun.

Pocket holster

Pocket holsters are the least popular ones because they are pretty unreliable. Their design implies you need to place them inside of your pants pocket, and they rarely have any kind of additional security features. It may happen they fall out of the case, and there’s not even a retention strap that will hold them in their place, safe and secure. But some people are fond of them because of their simplicity. The experts say that if they are built in a high-quality manner, they can be reliable just like all other pistol holster types. They can be a good choice for concealed carry, and they are usually created from leather or some kind of thick cloth.

How to choose the right holster for you?

Choosing the right holster can be a bit tricky because they will all do pretty much the same thing, it’s just the matter of how you feel while wearing them, and how good of access to your weapon you have. You need to make sure they fit you perfectly and have all the important features you value the most.

Here are some tips you may find handy when the time for the holster purchase comes:

  • You should determine where you wanna place your holster, on what part of your body. The best advice we can give you is to go to the closest gun gear store and try them all on, each type of a holster. That should give you some insight into this matter.
  • Decide whether you want a moulded or universal gun case on your holster. If you own only one gun, then it would be better to buy a holster designed specifically for that model, but if you have more pieces of weapon, and you would like to use one holster for all of them than a generic case is the better option.
  • Make sure to understand there are several levels of retention. The first one will allow you to access your weapon quickly and easily, while others, on level 2 or 3 could make this move a bit more complicated. 
  • When choosing the right holster, bear in mind that it has to meet three main criteriait needs to be safe, accessible, and secure.

How to Reload Ammo?

If you are into weaponry, you must know that many people prefer reloading their ammunition themselves, instead of simply buying new rounds. There are several reasons for that, and in the next paragraph, we are going to cover that topic, but right now, you should know that you will meet some great benefits if you decide to become an ammo reloader yourself. Also, we are going to present to you all the things you will need for this assignment, as well as with some guidance on how to reload ammo. But bear in mind that this is not a game and that you need to be super careful with these presses.

Why Should You Reload Your Own Ammo?

As we previously mentioned, ammo reloading will bring many great things into your life. It will be a decision you won’t regret, but let’s be clear – you will need to invest in a good reloading press, you will have to be patient and to spend some time practicing, and you will need to dedicate your time to this whole process. Here are the most important reasons you should do it.

It’s economical

Most people start this journey because they are tight on a budget and want to save some money. Reloading ammo will pay off, that’s for sure, but this thing can be tricky because when you have more rounds on disposal, you will probably shoot more. For starters, you need to understand that this endeavor will need a certain investment, first in the reloading press that can cost from one hundred to a couple of hundreds of dollars, depending on its quality. Also, you will need to purchase shell holders, specific dies, and all other pieces of equipment. Now that you have everything you need, the amount of money you will save up depends on the caliber you use since the brass casing is the most expensive part of the round. For example, for 9mm, that’s pretty affordable anyway, you will be able to save up to 20 percent of the cost. But when it comes to more expensive rounds, like .308 is, reloading process will allow you to save more than 50 percent of the total cost.

It’s fun

If you are a passionate gun lover, there is no doubt you enjoy playing with your weapons – using them, cleaning them, upgrading them, and buying adequate gun gear. That’s why we are absolutely sure you will also love reloading ammunition. It is a process that will provide you with a sense of great accomplishment, especially if you enjoy engaging in DIY projects. There will be certain things you will need to master in the field of mechanics, and the time you will spend reloading ammo will definitely be well spent. Experienced shooters say that there’s nothing better than using your own rounds, the one you reloaded with great accuracy, that it’s something that brings even greater joy in shooting or hunting experience.

It will provide great accuracy

Many hunters and shooters decided to start reloading their ammo because that way, they can be sure each round will be more accurate. The reloading process will allow you to have customized ammo suitable for every piece of weapon you own. During the reloading process, you can add or reduce the amount of gunpowder in order to adjust the speed of the bullet as it goes through the barrel. That’s one way you can come to great accuracy. Another is to extend the length of the rounds, which means to set the bullets further away from the brass casings. That will reduce the amount of force the bullet needs to have in order to leave the casing.

It will bypass restrictive gun laws

As it turns out, it’s getting harder and harder to get the ammunition the regular way – by purchasing it in the store or online. That’s because gun laws are becoming more and more restrictive in this field. On the one hand, there are a great number of cities that prohibited online sales of ammunition, and on other, some states like California came out with a bill that demands to have an ammo license in order to purchase rounds. And even then, you can do it only through a licensed vendor. So as you can see, it can be quite difficult to provide yourself with these gun essentials. That’s why reloading presses and reloading processes became the thing many people choose. You won’t have to think about having enough ammunition for the next shooting practice or hunting season.

What do I Need to Reload ammunition?

Certainly, the first thing you need to purchase is a reloading press. It would be best to get a bench mounted one that’s made in a high-quality manner, by the reliable manufacturer. Later on, we will explain what are the main types of reloading presses, and provide you with information that will help you conclude which one could be the best choice for you.

Then, if you want to reload your own ammo, you will need the powder scale. The digital option is way more popular right now because of its accuracy and the fact it is super easy to use. The balance beam scale is another old-school option, but it works just as good if you know how to handle it. Then you will need a powder measure that will dispense the powder into the case. There are two types – press-mounted and bench-mounted. The first one can speed up the reloading process because you can get multiple measures and set them up permanently for different calibers. But if you like to experiment with different powder charges, it will be easier to use a bench-mounted powder measure that can be manually operated.

It is super important to have adequate reloading dies. They are steel made threaded cylinders you need to push the case up into. There are several types of dies available – resizing or decapping die, the carbide sizing die, expanding die, and bullet seating/crimping die. Other necessary stuff for the reloading process are firm and sturdy bench, shell holder, tumbler, bullet puller, storage boxes for loaded ammo, and manual. It is essential to study the instruction details and steps reloading press manufacturers provided for you in order to avoid making mistakes during this process.

How to Reload Ammo?

If you wonder how to reload ammunition, we are going to give you a step-by-step guide that could make it easier to understand and master this process. But bear in mind that we are not talking about any specific caliber and that these steps and the way you are doing them may be a bit different regarding this factor.

First, let us just remind you about all the essential parts of the bullet cartridge. We have the casing, the gunpowder, the bullet, and a primer. When it comes to the way every cartridge works, here is the most simple explanation – the gun hammer will hit the primer, which will then create an explosion that will light up the gun powder and push the bullet out of the barrel.

Now, let us begin with a reloading ammo process.

1. Reloading gun ammo

  • Clear the casing

The first thing you need to do is to remove any sort of filth or powder residue that’s been left behind in brass cases. You can use a soft cloth and rub the inside of the case with it. After that, you should lubricate it in order to prevent it from getting stuck in the sizing die. Also, you need to make sure every casing is in perfect shape and throw away all of them that have some sort of cracks, bulges, or dents.

  • Remove the used primer

After this step, you should insert the case into the right place at the reloading press, making sure the handle is up. Then you need to bring the handle down in order to resize the case and to remove the used primer from it. At this moment, you should raise the handle again, take out the casing, and repeat the process with another one. It’s great that some presses allow you to place and do this step on more casings at once.

  • Insert the new primer

Now that you have removed the used primer, you need to insert a new one. In order to do that, you should put the case in a shell holder, pull the handle up, and place the primer into the primer arm. Then you just need to lower the case onto the positioned primer. The process is done. Check if the primer is aligned with a case and repeat this step with another one.

  • Reload the casing with powder

You need to understand that the type and amount of powder needed are different for each caliber. That’s why you have to research this subject thoroughly and know the precise details. The next step is to weigh the powder. You can do that manually each time, or you can use calibrated dipper or volumetric powder measure. For placing powder into the casing use funnel, and make sure to get the exact amount. Also, it is important to clean the reloading area from any spilled powder because it can damage your equipment.

  • Seat the bullet

You need to be careful at this point. You have to place the bullet above the open casing, and then to lower the press handle so that it can make your round compact. Make sure to adjust the seater in the right way so you can be sure the bullet goes as deep into the case as you wish. This step is the final one when it comes to reloading your ammunition. After that, you simply need to place the ammo into the appropriate box that will be stored separately from your guns.

2. Reloading shotgun ammo

Reloading ammunition for a shotgun is a bit different. You should know that each shotgun shell has five components – there is an empty hull, plastic wadding, primer, powder, and lead balls.

  • Check empty shells

Since the shotgun shell is the only thing that’s reusable in this matter, you need to check if there are any damages around its mouth. The best way to do that is to hold it up to the light and look for splits or some significant wear. If there are any, then you need to throw it away because it cannot be used again after all. It’s generally not good to use those shells that were on the ground, exposed to different soil conditions and risk of people stepping on them, and the best ones are usually those removed directly from the gun.

  • Remove the spent cap

The second step demands you to place an empty shell that’s in good condition into the reloading press and pull the lever in order to remove the spent cap. That way, you will also resize the cap to the appropriate level according to the specifications.

  • Fill the shell with powder

Again, when it comes to this step, you need to know precisely what type of powder you need, and what is the right amount you can use. In order to get to that information, consult with an expert or some reliable guide. This phase includes measuring the powder with suitable equipment, just like we mentioned above when we talked about reloading gun ammo and placing a primer.

  • Place a wadding

You now need to use the lever in order to place a wadding and the right number of shots. Bear in mind that different gauge shells use different sizes of the shots. For example, for the one that’s made from 12 gauge 7.5, 8 and 9 size shots will be appropriate.

  • Crimp the shell

The last step is to rotate the reloader so you can crimp the shells closed. After that, all you have to do is to place them in a secure box and store them away. Your shotgun rounds are now ready for use.

Types of Reloading Presses

There are three different types of reloading presses you can find in the market. Some of them are better for beginners, some for professional and experienced shooters, some of them are designed to load one round at the time, and some can be much faster and more productive. 

  • Single-stage press

Single-stage presses are created in a way that allows them to hold only one dime at the time. They are the most simple versions, and they are most commonly used for rifle ammo reloading. These presses are the most affordable, but also the least productive ones, and they are suitable for people who are learning the process of reloading for beginners. Most things with these presses are done manually, including priming, but some of them have priming attachments.

  • Turret press

This is one of the most popular and best-selling reloading presses because it has a priming arm and a press mounted powder measure that will allow you to load a lot of rounds in a short period of time. One of their advantages is that you can purchase empty die plates and then load them with all dies you need for one caliber. The price range of this press type goes from very cheap and affordable to pretty expensive ones, depending on the brand name and quality they are made.

  • Progressive press

This is the most serious reloading press that’s suitable for people who need to load lots of rounds in the shortest period of time. They are quite complex, and beginners won’t be able to handle them easily. The thing that separates them from turret presses is the fact they have a rotating shell holder plate, and not the die plate. And not only that – at the bottom part they have several shell holder locations, not only ones like a single stage or turret presses. It has the capacity to load hundreds of rounds per hour, and most processes are automated.

Conclusion

If you read this text, there is no doubt you will become an ammo reloading expert. It’s not because we provide you with everything you needed to know, because these are only the essential steps and the whole thing is more complex than that, but because you must be really interested in this subject. And our experience showed that every shooter who engaged himself in this process mastered it completely. It’s something that excites weapon lovers and gives them a sense of great value. We are great reloading supporters, and we believe that there are only benefits you can get from reloading your ammunition. The only thing you need to invest is your time.

Bow Hunting Deer Tips and Tricks

bow hunting deer tips and tricks featured image

Deer hunting is no joke, it’s an experience most hunters prepare themselves for years. This animal is fast, it’s big, and it’s not easy to catch. Deer have some great instincts that will make it quite hard for you to hunt them down. So it’s super important to know their movement, the way they behave, to know where exactly to shoot, and how to lure them into the trap.

But most importantly, you should know that it’s not the same if you engage yourself into this experience in the early season, during the rut, or in the late-season time. That’s why we wanted to provide you with bow hunting tips and tricks that can be helpful during each of these phases.

How to Bow Hunt?

You definitely want to be ready for this hunting season, especially if you are determined to capture a deer by yourself. In order to do that you need to embrace certain suggestions and deer hunting tips.

1. Practice

You should have it in your body, and your hands, the whole experience before you even go into a real hunt expedition. That means that you should go into the woods and practice body movement, the angle you are going to shoot, and the patience you will need to have. Your equipment must be prepared such as hunting bows or crossbows, and bow hunting arrows ready for a shoot.

practicing bow hunting image

(Source of photo: Business photo created by wirestock – www.freepik.com)

2. Learn deer anatomy

No matter what weapon you are planning to use during the hunt, you need to know where exactly you should aim and shoot. Experienced bowhunters have several options, but beginners should try hitting the lung area of deer’s body because it is large, hard to miss, and deadly. It is important not to let an animal suffer.

3. Lose the scent

Deer have a great sense of smell, so it is crucial to make sure they don’t know you are close to them. The experienced hunters suggest you start using scent control soap to wash yourself a week before hunting because it can make all the difference, and then put on an activated carbon clothing. This is one of the most significant bow hunting tips.

4. Patience is everything

You need to learn how to stay calm but alert all the time. Deer hunting is a mind game, and your body has to stay really steady for long periods of time. Sometimes it will take hours to get your eyes on the target, and it is essential to know how to stay put and move extremely discreetly.

5. Be ready to fail

There’s no guarantee your hunting day will end up with a victory, so it is very important to prepare yourself for failure. It may happen you don’t even see a deer, or if that even happens, you may be too far from the target or unable to have a clear shot. The idea is to embrace and enjoy the whole experience, no matter what.

Early Season Hunting Tips

There is no doubt that the early season is the best for hunting deer. That’s because they are very relaxed since they haven’t met too many humans up to that point, and they move a lot looking for the summertime food that’s on their disposal everywhere. In this phase, three things are crucial – for you to have a good hunting plan, to keep the pressure on an animal minimal, and to target the right areas and routes.

Hunting plan

Your hunting plan needs to be established a week or two before the official start of the season. That way, you will have everything in its place, and deer won’t be scared by humans walking around their habitat. That will allow you to have them unprepared for what’s coming, and it will increase your chances of success. So control that urge of yours and don’t go to hunting spots too early. Let animals relax and get comfortable enough.

Minimal pressure

It is clear that you want to get to know your prey better and to learn as much as you can about their behaviour and their movement. But it is crucial not to scare them away and make them run too early in the game. Bowhunting implies having close contact with an animal, but for starters, you should use cameras to get more information about deer.

Also, if you decide to take your position in a field and try having a good look at what’s going on, you need to make sure to use unscented cloth, or naturally scented hunting gear.

Target the right routes

If you wonder how to bow hunt deer, or more precisely, how to prepare for this endeavour, you should know that targeting deer routes will do half of the job. Deer like eating food with a high level of sugar, like nuts, fruit, acorn, etc. If you establish sports where they usually eat, you will have a great advantage. Using cameras for this purpose is a great option, because that way, you will not scare them away, and you will also get to know where their sleeping place is.

Deer are sometimes predictable animals that will follow their routine and patterns, so targeting their routes will be a huge win for you.

bow hunting in the woods photo

Hunting During the Rut

Bowhunting deer during the rut isn’t something many hunters will look forward to. It is the phase when most of the gun hunters already created great pressure on deer, so they are pretty scared and in hiding. The chances of seeing and killing a deer at this stage are therefore pretty low. However, there are hunters who find this to be the challenge. Only extremely experienced bow hunters will be able to score a kill at this point, which is then classified as the greatest accomplishment. Here are two deer hunting tips and tricks that could help you to end up like a winner after all.

Follow the does

Even though most hunters won’t engage themselves in hunting does, the information where the girls are can be out of great importance because bucks will always be close by. This is the time of the year when deer are only thinking about does, so if you find them, you will find bucks too. Certainly, locating does won’t be easy either. At this stage, having good instincts and knowing the land well are two most important things.

Now, if you were hunting the early season too, and not just during the rut, you will probably have more chances of knowing where the does are. In the early season, you had time to establish where they congregate and show up.

Rely on ears

You wouldn’t believe how much information you can gather by simply using your ears and listening to what’s going on around you. If you focus on what are the noises in the hunting area, you may establish there’s a buck close by who is searching for does, or maybe two of them in the middle of the fight. This thing can help you determine what your hunting plan should be. The first option is to find the perfect position, strike a pose, and simply wait for deer to show up. But that may take several hours, and it can be quite boring.

Another option is to stalk the buck. However, since these tactics can be pretty difficult and exhausting, most bowhunters will go with the alternative, but based on certain notes they made about sounds coming from the environment. It would be best to come to the area in the early morning, listen to what’s going on with bucks, and then come back later during the day to score a kill. It may happen other gun hunters scare deer away in the meantime, but that’s always the risk at this stage.

Late Season Deer Hunting

The late-season is the time when experienced hunters can prove themselves to be great. Hunting the late season brings in a great number of difficulties. Deer are mostly well hidden since the previous period was very stressful for them, the weather is cold, and it is way less comfortable to stay out all that time, and you have to have some great skills and techniques regarding hunting. You have to really know how deer behave at this point, and you must master the skill of remaining unnoticeable if you want to succeed. So the bow hunting deer tips are crucial now.

Follow the food

When the weather starts becoming cold, there will be fewer food deer can find and consume. In the end, when the winter comes, it will totally disappear under the blanket of snow. This means bucks will move less, they will stay away from the wide-area that don’t have much to offer them and focus on a zone that’s filled with something to eat.

Your only chance to find deer at this phase is to know where the food is. Look for the field full of crops and wait for them to show up, you won’t miss them for sure. Also, the good thing is you will be easier to follow their activities and their movement with snow on the ground.

deer in the nature image

Be undetectable

Previous two hunting phases spooked and traumatized deer tremendously, so they are now, in a late hunting season, super careful and cautious. They will only move through an established route, and if they notice even the slightest changes, there’s a possibility they will run away for good. That’s why it is essential you don’t scare them with your presence.

In order to determine what their usual behaviour is, you should use cameras. And if or when the time for bow hunting comes, make sure not to spread your scent. Use scent-free clothing, and camouflage well.

Conclusion

As we previously mentioned, deer hunting is a serious thing that demands a lot of preparation, patience, and a great amount of knowledge. You need to get to know the animal you are pursuing in every possible aspect, but also, you need to know all the tips and tricks that could help you end the hunting season with a win. In the end, bear in mind that it’s not the same if you engage in hunting in the early, late season, or during the rut. Each phase has its own rules, and it is crucial to prepare yourself well for the exact stage.

Things to Consider Before Buying a Gun Safe

Just how important is it to own a gun safe these days? Here’s the truth: more people own guns these days than ever before. You are probably one of them and to many, it’s almost seen as a necessity. Our reasons to own one differ but regardless of the reason you use your gun for, safe storage is a must.

Guns were designed just for that. They may be bulky and expensive but the best ones will keep your guards organized and safe. Even your loved ones will be secure and free from harm when you have a gun safe in your home.

More reasons as to why all gun owners need a gun safe include:

  • Safety from theft
  • Safety from fire damage
  • Stores the gun together with accessories

Of course you will want to own a great gun safe and we are here to assist you to make the right decisions. First off, if you have more than one gun, compile a list detailing each of them.

Also compile a list of all the gun accessories you have including rings, scopes, grips, speedloaders, magazines, and such. Add on to that every other item you feel will be safe enough in the gun safe. This could be anything from binoculars, conversion kits, shooting glasses to bi-pods, multi-purpose tools and so much more.

There are plenty of things to consider before moving on to purchasing the best gun safes. We hope that through our list, you will save yourself from the pain of having to sort through dozens of collections by finding out what really makes a great sun-safe or rather how to choose the perfect gun safe.

1. Item value

How valuable your guns and accessories are will influence your choice of a gun safe. If the items are extremely valuable, you will certainly go for a safe with advanced security features and vice versa. It’s also recommended that you calculate the replacement value of the said items and use the comparisons to narrow down on a proper choice.

2. Construction

Steel forms the most important and costly part of a gun safe. It’s what keeps the burglars and other bad guys away. Both the door and walls should have a significant thickness of steel.

Wall thickness: The wall’s thickness, as well as the shell strength, should be at the top of your list. To be precise, a proper gun safe will have a thicker and bulky 12-gauge steel. Some even use 10-gauge steel which is even thicker and stronger. Keep in mind that a higher gauge number means the steel is thinner.

The gun safe’s door outer sheet should not exceed 7 gauge. And while checking the steel thickness don’t fall for the ‘total door thickness’ descriptions, it’s a trap; only look at the steel’s thickness.

When the exterior is strong, there will be no break-ins and more importantly, all your guns, rifles, and accessories will be safer. If you are lucky enough to find those with concrete amalgamate linings, your items will even be safer.

Body wields: Another aspect to look out for is body wields. Properly welded seamless joints guarantee more protection. For the cheaply-priced safes, robotically welded joints are the preferred option as opposed to those joints welded by an individual. You can always check with the manufacturer to confirm this.

Bolts holes: Proper bolt holes will also add to the protection. Ensure they are well spaced and located near the edge of the base so as to secure the safe firmly to the ground. Those that have holes placed at the center aren’t exactly a good option.

3. Size and Weight

Gun safe capacity: Advertised gun safe capacity can be misleading. More often than not, the advertised capacities hardly put into consideration extra features the guns may have, for instance, pistol grips, mag wells, or long barrels.

Further, those with better fire protection tend to have thicker walls than eat into its internal space. So you may end up with racks or a safe interior that only keeps probably half of the advertised capacity.

It’s best, therefore, to always read the reviews and dig up the features to ensure they are categorical on the gun capacity. Better yet, you can opt for a gun safe without an interior or you can go ahead to install the racks on your own.

If you see the possibility of your gun collection growing in the future, it will be best to go for the gun safe with more room.

Installation and dimensions: In the case where you look to install the safe in your house, there are a couple of different ways you can go about it. Sometimes the sizes end up an inch more or less than advertised. So if you are unable to visit a showroom to get the measurement, you can buy it first and come to install it later.

Weight: A heavier safe won’t be easy to lift from one place to another. That’s their major downside but for security purposes, a heavier safe is definitely a great choice. Gun experts also recommend that you consider the weight of a safe before making a purchase. A good example is a biometric rifle safe, some weigh up to 2500lbs. Most average RSC safes will have an average of 750lbs and that will do just as fine because it will be good for space and at the same time weighty enough to be easily carried around.

4. Fire and burglary protection

There a couple of states such as California where it’s mandatory to only own a gun safe that complies with the state’s DOJ requirements or has the UL Residential Security Container Rating (RSC).

RSC gun safes: UL 1037 Residential Security Container (RSC) is the minimum rating while Exceptional UL 1037 RSC rated safes are those that can resist against extreme attacks. A B-rate is the lowest level of solid protection you can have against extreme attacks. A B-rated safe will have 1/2-inch plate steel on its door while the walls will have ¼-inch plate steel.

If you need more protection, you can always opt for the higher-rated safes. Just in case you aren’t sure which rating is right for you, please seek to know from your state or the insurance company. Keep in mind that some of the cheap gun safes rarely have an RSC rating and such unreliable safes are no better than a typical gun cabinet or closet.

Hourly fire rating: A safe that can survive up to 1-hour of fire should be your starting point if you can afford one with an even higher rating that’s great. Those that can’t put up for one hour could be a huge risk because it usually takes hours to calm down a raging fire. However, if you can’t afford a safe that can meet the 1-hour rate, opt for the longest fire protection rate you can get at your budget. Ensure the fire protection is U.L rated or it’s been verified through an independent laboratory test.

5. Frequency of opening the safe

If you intend to use your weapon more often, perhaps daily, this will largely influence the type of gun safe you opt for. The same applies if you don’t intend to use it frequently. And this can take place in two ways.

First off, you can have your safe installed far away from your living areas if you won’t be using the gun frequently or you can opt for a separate handgun safe if you need your gun alongside you often.

Secondly, you can make the selection based on the type of locking mechanism. Here’s a closer look at the locking mechanism.

Type of locking mechanism: With many options available, it’s only fair to find out the good in each locking mechanism. A biometric lock is pretty fast because it only takes a touch of your finger to have it open. The same feature also makes them incredibly safe.

Quality electronic and dial locks that are U.L rated are sure to give you excellent protection. However, not all electronic locks are EMP resistant.

Redundant locks on the other side allow you to enjoy the good from both sides. They are a blend of an electronic and mechanical lock. You can always switch to the other one if one of them fails. If you intend to go for a mechanical lock, make an effort to have it serviced regularly.

6. Pricing

Prices of gun safes differ based on the manufacturer, brand, size, looks, the type of gun safe, security features, amongst many other factors. What’s more important is to take your budget into consideration when making a selection.

If you own guns and accessories that fall on the higher side of the price scale, you have every reason to purchase an advanced secure gun safe and that should cost probably 10-30% of the replacement value of your items.

Spare parts/maintenance: While making the purchase be sure to check out the availability of spare parts and maintenance services. You don’t wish to end up with a safe you can’t probably find a replacement electronic keyboard or biometric lock. Also, the earlier you make your purchase the better because steel prices and the prices of other materials that make up a gun safe seem to be on a gradual upward trend.

Be careful not to fall for the cheaper low-quality ones. Also worth mentioning is that there are some cheaper safes that are equally great as the expensive one.

7. Gun safe insurance

Want to insure your gun safe against fire, theft, or other factors? Just ensure you give your insurance company a call beforehand. And keep in mind that your gun safe will only be insured if it meets the set minimum requirements by the insurance company. However, some don’t recommend this move for the reason that your frequent premiums (for lower-priced safes) could over time total up to the amount you would pay for an advanced and extremely safe gun safe.

Shotgun Tips For Beginners

If shooting or hunting is your passion then yes, you can now fulfill all your dreams with your own passion. Having an interest in some of the enjoying and adventurous activities has now become very much common among young teenagers but how can you perform the best in this activity.

Numerous shooting spots and shotgun Ingham spots are there at which you can practice this activity to become a master. Hunting birds is a craze for some of the people and it is also a habit for the others.

Shotguns are usually and even broadly used for hunting the birds and thus, you can also use a high-quality shotgun during your performances to make it the best one.

The shotgun is a very powerful gun and it should always be kept safely as if it falls into the wrong hands then you are in big trouble. So to keep your Shotgun safe you must have a full proof Gun Safe. Sometimes the features of gun safes are not enough then you should opt for a Gun Safe Accessory.

Shotgunning is one of the best ways to do hunting. It is now easily available in different sizes as well as styles. If you really want to become a master in shotgun then yes, here are some of the best amend amazing shotgun tips for beginners by which you can transform yourself from just a rend beginner to a master or an expert.

Learning the basics with 100% clarity

What does the basic include? Don’t you really know the same? You must be aware of the very basic things including the best options to wear during shotgunning or much more.

Holding the shotgun correctly

You must hold the shotgun by putting your finger in the middle of the grip. This will surely help you, king, very well in the shotgunning.  You need to hold the gun with the firing hand with just a very light handshake and gently as well. Your shoulders and feet must have an appropriate distance so that you can feel a relaxation in your knees. You must not put your fingers on the trigger. Your eyes must also be in proper alignment with the shotgun.

Put the gun in firing position

When it comes to the firing position, you must put your gun snuggly into the shoulders by keeping your hands in a similar position. You must put your butt very firmly on your shoulder. If you are unable to put the shotgun tightly into your shoulders then it would surely push a kick and you may have to suffer from a drastic or almost unbearable pain. Your body will automatically absorb such pain by keeping the shotgun on your shoulders in a very tight manner.

Developing your swing

As you all may not know that a fully loaded shotgun may cause you drastic harm. You must be very careful while using them. It can be possible only when you will keep on practicing them again and again. You need to focus on putting the shotgun to be very straight from your body and its butt must be on your shoulders. Keep the shotgun very tightly.

You can check out the Video below to see How to aim a Shotgun

What you actually want to shoot

Here comes the final step in which you just have to decide what you actually want to shoot. Setting or deciding a target will surely help you handle the gun properly and perfectly. You will be able to get an idea of the space and other related aspects while shooting but only after deciding your target.

Duck Hunting Tips For Beginners

Here we are describing some relevant tips for hunting for beginners which should not be avoided.

Though, hunting is not a choice of every person but somehow many people are willing to shoot out their first target.

However, it is not everyone’s cup of tea. It requires some skills and techniques. So we are presenting some important tips and techniques which should be kept in mind while hunting. Apart from the skills and techniques you should also keep in mind to purchase a Good Gun Safe to keep your rifles safe.

If you are a beginner then it might be possible that you find it much difficult as it contains so many small things which have to be remembered while hunting. But you do not need to worry about that.

Our simpler and easier tips for hunting make your hunting game more adventurous. So be ready to remove all the doubts from your head and start focusing on your prey.

How to make your hunting a Breeze?

The only thing which matters while playing your hunt game is to balance your physical and mental discipline. As it is an activity that is going through very ancient time, it requires lots of planning procedures. This is beneficial to your physical fitness as well. It would be said literally if a beginner is going on a hunt for the very first time that a deer caught in the headlights. With the help of these tips, it will become easier for beginners to target your prey.

1. Beginners should use small equipment while hunting

You may use several types of guns for hunting your prey. These should be easy to handle for making use while hunting. You may use guns like handguns, shotguns, rifles, and air guns. But please make sure that you are fully competent to own such kinds of arms.

Apart from this, you must be aware of the rules and regulations for using handguns with different caliber and cartridge as per state and central laws.

2. Use of Crossbows

Crossbows are one of the most essential and helpful apparatus for hunting. However, it has been used since old age. You can hunt any kinds of birds such as upland birds, or Turkey birds by using crossbows as your weapon. All you need is a licensed crossbow for enjoying your hunting game.

3. Beginners should wear comfortable but adequate clothes

Though, it should not adopt very strictly in any kind of hunting such as deer hunting. But it would be more appropriate if a beginner wears those clothes which are not so much conspicuous like a camouflage dress. It is recommended that a hunter should wear more casual and regular clothes while hunting. Such as normal jeans, a t-shirt, sneakers, and a cap so do you feel ease while moving. Although, there is also a requirement of special dresses for hunting. The main motive behind this is to protect you from thorns and swampy injuries.

4. Must consider a favorable season for hunting

If you are a beginner in hunting then let us tell you that in hunting, season and weather matters a lot. The variety of some species of animals for hunting is most probably depends on the season and weather conditions. But don’t forget to comply with all the bye-laws and regulations of the state and central laws. You can also take help from different websites. These will let you know about the best season and weather for hunting a particular species of animals as well as birds. As you are a beginner, it would be better for your well being to know about the laws and regulations also for avoiding any kind of problems related to legal matters.

I wish you guys Happy Hunting but you should also be aware of Gun Safety. Gun Safety is ensured by purchasing the Best Cannon Gun Safes for storing your weapons.

Tips For Shooting In The Dark

Shooting at night is not something that is liked by people but may be a necessity when you have intruders or some enemies which may make it mandatory to lift your gun at night

Shooting at night is not easy so here are few tips that need to be considered if you are shooting at night.

1. Right equipment

When you are shooting in the dark, then make sure that you are well equipped with the right kind of equipment and have proper lasers to aim your target. Just like you opt for a gun you should also opt for the Best Cannon Gun Safe which can be very helpful.

2. Using a flashlight

It is not easy to use a flashlight simultaneously along with opting out self-defense for yourself if you are not a master at shooting. But a flashlight may help you to aim better at your target; you can also use other rail lights to help you accomplish proper sight of your goal.

3. Lasers give your position but help you to aim at your target

The laser guns that you use at night have two visible laser spots pone at the end of your gun and the other at the object you are aiming at. When you are just practicing, then there is no harm as nobody can track your location. But when you are i9nto a fight then pulling on the trigger will show a brightly lit spot at your gun end which will give track of your location to the opponent. So make sure that you are quick at shooting your target and do not press the trigger for long which may let the opponent let you identify your position.

4. Guns sights are faster in the night

In the darkness, everything in front of your eyes is a blackout frame, and it is easy to sight your gunshot in the dark as you can easily locate that bright gun spot on your target. You do not have to align your gun much during the night and thus avoid delay in shooting your target.

5. Laser a help not a hindrance

Many people feel that laser gun shots cause hindrance to the iron shots, but the fact is something else that you may think of.

Laser guns do not help you much in the daylight as the laser dot is not clearly visible in the daytime but when the lighting condition is low and dark, then you can easily spot the trace of the laser dot to aim at your target. The laser is one of the most used new technology just like this you should purchase a new technology gun safe just like Biometric Gun Safes.

6. Be watchful

It is not just about shooting, but you have to be alert and vigilant every time. You should know where your family members are when you get into a moment where you need to shoot your enemy and protect your family. You should think sharply and should be capable enough to track the path of the intruders.

7. Opt for training

Shooting is not everyone’s cup of tea and to be an ace shooter you need to have the right knowledge and training to be accurate at your aim. So it is always good to be trained to master the art of shooting at night. You can seek help from the professionals and undergo training sessions under their guidance to face the challenge of shooting during the night.

Best States And Worst States For Gun Owners

If you really want to live in a state that gives you the freedom for gun usage and does not put any restrictions on gun rights then you must choose the best state where you feel free and avoid the worst state which has strict laws regarding gun owners in the U.S.A.

As well every state has its rules and regulations. Some are harsh and some states are pleasant towards the gun owners.

Here we discuss the best and worst states for gun owners one by one which you must know if you want to be a gun owner and protect yourself and your family members for any cause.

Few Best States for Gun Owners

1. Arizona

The Arizona state in the U.S. is very friendly with its gun owners. It is the first topmost state in the Law of Gun Violence’s board.

  • In this state, you don’t need any possession list.
  • This state put little limitations on gun ownership and its sale.
  • You don’t require any permission for a handgun or rifle purchase.
  • In this state, you can either use the covered or opened handgun whatever you want.
  • But we advise you to use the best handgun safe for your home for your own safety.

2. Alaska

This is the second-best state that does not put any restrictions on the purchase of guns. This state is also very friendly towards its gun owners.

  • In this state you can purchase a number of guns without waiting for any permission.
  • You can use a cover or openly gun without any permission.
  • Use different gun safe accessories for your comforts.

3. Mississippi

These states know also provide a friendly relationship with their gun owners and reduce their limitations on the usage of the gun.

  • In this state, the firearms seller does not require any license for the purchase or sale of the gun.
  • The gun owners use the firearms without any legal authorization.
  • They can use either open or conceal the gun and pay the little bit fees for this to the government.

Few Worst states for Gun Owners

1. Illinois

It is the first worst state in the U.S. which has a lot of restrictions on gun ownership.

  • In this state, the gun owners or the firearms dealers must have a license to use the gun.
  • This state follows very strict gun rights towards gun owners.
  • In this state, you must require the permission for carrying conceal or open gun.
  • The gun owners have to wait for the handguns and rifles.

2. Maryland

It is another worst state for gun owners.

  • This state is very restrictive on the usage of concealing guns and requires full permission for this.
  • In this state, the gun owners must have to prove that their life is in danger to get permission for the gun.
  • In this state, you have to register if you want to purchase and use the handgun with the state police.
  • The gun owners also submit their fingerprints as evidence if any miss-happening occurs.

So these are the few best and worst states that we discuss in this article. We hope this will help you in the future if you want to protect your life by using guns without any restrictions and become a responsible gun owner.